No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartLogger3000 User Manual

This document describes the SmartLogger3000 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF and 02312SGG.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Safety Precautions

Safety Precautions

General Safety

Before performing any operation, read the precautions and instructions in this manual and strictly follow the precautions and special safety instructions provided by Huawei to avoid accidents.

The installation, operation, and maintenance of the equipment must comply with local laws and regulations. The NOTICE, CAUTION, WARNING, and DANGER items in this document do not cover all the safety cautions and are only supplementary to the laws and regulations. Huawei assumes no responsibility for violation of general safety operation requirements or design, production, and equipment safety standards.

Ensure that the equipment is used in environments that meet its design specifications. Otherwise, the equipment may become faulty, and the resulting equipment malfunction, component damage, personal injuries, or property damage are not covered under the warranty.

Statement

Huawei will not be liable for any consequences of the following circumstances:

  • Damage during the transportation by the customer
  • Storage conditions that do not meet the requirements specified in this document
  • Installation or use in environments which are not specified in related international standards
  • Failure to follow the operation instructions and safety precautions in this document
  • Operation of the product beyond specified parameter ranges
  • Unauthorized modifications to the product or software code or removal of the product
  • Device damage due to abnormal natural factors (force majeure, such as earthquake, fire, and storm)

Personnel Requirements

Only qualified and trained electrical technicians are allowed to operate the device. Operators need to meet the following requirements.

  • Be properly trained.
  • Read through this manual and master related safety precautions.
  • Get familiar with the safety specifications about the electrical system.
  • Understand the components and functioning of a grid-tied PV power system and relevant local standards.

Personal Safety

  • Wear personal protective equipment, including but not limited to safety shoes, protective goggles, and safety gloves.
  • Before using a device, remove any conductors such as jewelry or watches to avoid electric shock or burns.
  • Use tools in correct methods to avoid hurting people or damaging devices.
  • If there is a probability of personal injury or equipment damage during the operation of the device, immediately stop operations on the equipment, report the case to the project owner, and take feasible protective measures.
  • In the case of a fire, immediately leave the building or the equipment area, and turn on the fire alarm bell or make an emergency call. Do not enter the building on fire in any case.

Protection Label

Do not scrawl, damage, or block any warning label on the device.

System Installation

Never work with power-on during installation.

  • No flammable or explosive materials should exist in and around the equipment.
  • Ensure that the devices are not connected to a power supply or powered on before finishing installation.
  • Ensure that the device is installed in a well ventilated environment.
  • Ensure that the heat dissipation system of the device is not blocked.
  • Tighten the screws using tools when installing the device.
  • After installation, remove the packing materials from the equipment area.

Grounding

  • When installing the device, always make the ground connection first and disconnect it in the end.
  • Do not damage the ground conductor.
  • Do not operate the device in the absence of a properly installed ground conductor.
  • The device must be connected permanently to the protective ground. Before operating the device, check the electrical connection of it to ensure that it is securely grounded.

Operation

Strictly comply with the safety precautions in this document and associated documents to operate the SmartLogger.

When operating the SmartLogger, follow local laws and regulations.

Commissioning

When the device is powered on for the first time, professional personnel is required to set parameters correctly. Incorrect settings may result in inconsistency between the device and the certification of the country or region where the device is located, affecting the normal operation of the device.

Maintenance and Replacement

  • Only qualified professionals are allowed to remove safety facilities and inspect the device.
  • When maintaining the SmartLogger, wear ESD gloves and comply with ESD precautions.
  • Only personnel certified or authorized by Huawei are allowed to replace the device or components (including software).
  • Any fault or error that might cause safety problems must be reported immediately to a supervisor.
  • Maintain the device after you get familiar with this document and prepare the tools and testing equipment.
  • If the device is faulty, contact your dealer.
  • The device can be powered on only after all faults are rectified. Failing to do so may escalate faults or damage the device.
Translation
Download
Updated: 2019-10-12

Document ID: EDOC1100108365

Views: 1580

Downloads: 300

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next