Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POS Interface Configuration
Packet Over SONET/SDH (POS) uses SDH or SONET as the physical-layer protocol and provides a high-speed channel to transfer IP data in MAN and WAN.
- Overview of POS Interfaces
A POS interface uses SONET/SDH as the physical-layer protocol and provides a high-speed, reliable, and P2P IP data transfer. - Licensing Requirements and Limitations for POS Interfaces
This section describes licensing requirements and limitations for POS interfaces. - Default Settings for POS Interfaces
This topic describes the default settings of common POS parameters. - Configuring a POS Interface
Configuring a POS interface includes configuration of the link-layer protocol, clock mode, overhead byte, frame format, and CRC check. - Maintaining POS Interfaces
Maintaining a POS interface includes the tasks of using the loopback function to check the interface and clearing interface statistics. - Configuration Examples for POS Interfaces
This section provides POS interface configuration example, including network requirements, configuration roadmap, configuration procedure, and configuration files. - Troubleshooting POS Interfaces
This topic describes the common configuration errors.