Default Settings for E1-F Interfaces
This section provides the default settings for an E1-F interface.
Parameter |
Default Setting |
|---|---|
Working mode of the 1E1T1-F/2E1T1-F/4E1T1-F/8E1T1-F interface card |
e1-f (E1-F mode) |
Working mode of the E1-F interface |
Framed mode |
Timeslot bundling (in framed mode) |
All timeslots bundled into one channel, with a rate of 1984 kbit/s |
Cable type applicable to the E1-F interface |
120 ohm balanced cable (twisted pair) |
Clock mode |
Slave clock mode |
Line idle code |
0x7e |
Interframe filling tag type and minimum number of interframe filling tags |
Interframe filling tag type: 0x7e; minimum number of interframe filling tags: 4 |
Frame format (in framed mode) |
Non-CRC4 |
Whether to invert data |
No |
Whether to perform AIS detection (in unframed mode) |
Yes |
Whether to perform RAI detection (in framed mode) |
Yes |