Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for CE1/PRI Interfaces
This section provides the default settings for a CE1/PRI interface.
Table 5-1 Default settings for a CE1/PRI interface
Parameter |
Default Setting |
|---|---|
Working mode of the 1E1T1-M/2E1T1-M/4E1T1-M/8E1T1-M interface card |
e1-data (CE1/PRI mode) |
Working mode of the CE1/PRI interface |
CE1/PRI |
Cable type applicable to the CE1/PRI interface |
120 ohm balanced cable (twisted pair) |
Clock mode |
Slave clock mode |
Line idle code type |
0x7e |
Interframe filling tag type and minimum number of interframe filling tags |
Interframe filling tag type: 0x7e; minimum number of interframe filling tags: 4 |
Frame format used in CE1/PRI mode |
Non-CRC4 |
Whether to invert data |
No |
Whether to perform AIS detection (in E1 mode) |
Yes |
Whether to perform RAI detection (in CE1/PRI mode) |
Yes |