Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Installation of the Peer's Host Routes Based on LTE
Context
You can run the modem peer network-route or undo modem peer network-route command to determine whether to install the host routes for the peer IP address in the local routing table.
After the modem peer network-route command is run, the local routing table contains the peer's routes.
After the undo modem peer network-route command is run, the local routing table does not contain the peer's routes.
Procedure
- Run the modem peer network-route command to install the peer's routes in the local routing table.