Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE3 Interface Configuration
You can use CE3 interfaces to transmit services in the E3 system.
- Overview of CE3 Interfaces
- Licensing Requirements and Limitations for CE3 Interfaces
- Application Scenarios for CE3 Interfaces
- Default Settings for CE3 Interfaces
This section describes the default settings for CE3 interfaces. - Configuring a CE3 Interface to Work in E3 Mode
When you need to connect to a transmission network using an E3 leased line with 34 Mbit/s, configure a CE3 interface to work in E3 mode. - Maintaining a CE3 Interface
This section describes how to maintain a CE3 interface, including using the loopback detection function to check the interface and clearing interface statistics.