Configuring the Working Mode of a PON Interface
Context
When the device is connected to a GPON interface of an OLT, configure the device to automatically determine the working mode according to the received optical signal, or configure the PON interface connected to the OLT to work in GPON mode.
You are advised to configure a PON interface to work in auto-negotiation mode. To trigger another negotiation after a successful negotiation, reset the PON board. For example, if a PON interface of the device has automatically negotiated to work in EPON mode, you need to reset the PON board so that this interface can automatically negotiate to work in GPON mode when this interface connects to an OLT's PON interface that works in GPON mode.
If a PON interface is transmitting service data, changing the working mode will interrupt services on the PON interface. Perform this operation with caution.
Procedure
- Run system-view
The system view is displayed.
- Run interface pon interface-number
The PON interface view is displayed.
- Run port mode gpon
The PON interface is configured to work in GPON mode.
By default, a PON interface automatically determines the working mode according to the received optical signal.