Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
T1-F Interface Configuration
Compared with a CT1/PRI interface, a T1-F interface provides T1 access at a low cost. You can use T1-F interfaces to meet simple T1 access service requirements.
- Overview of T1-F Interfaces
- Licensing Requirements and Limitations for T1-F Interfaces
- Application Scenarios for T1-F Interfaces
- Default Settings for T1-F Interfaces
This section provides the default settings for a T1-F interface. - Configuring a T1-F Interface
To use a low-rate (512 kbit/s for example) T1 channel to transmit services, configure a T1-F interface. - Maintaining a T1-F Interface
You can perform loopback tests on a T1-F interface to check whether the T1-F interface is working properly and clear traffic statistics on the T1-F interface.