Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Network Connection Mode
Context
LTE cellular interfaces can connect to the 3G or LTE network only when the 3G or LTE network connection mode is configured for an LTE modem based on the type of the network provided by the carrier. If the 3G or LTE network connection mode configured for an LTE modem is inconsistent with the network mode provided by the carrier, configure a correct network connection mode.
Procedure
- Run system-view
The system view is displayed.
- Run interface cellular interface-number
The LTE cellular interface view is displayed.
- Run mode lte { auto | gsm-only | 1xrtt-only | evdo-only | hybrid | lte-only | tdscdma-only | umts-gsm | umts-only | wcdma-gsm | wcdma-only }
The 3G or LTE network connection mode is configured for an LTE modem.
By default, the 3G or LTE network connection mode is auto for an LTE modem.