Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Serial Interface Configuration
This section describes basic concepts and configuration procedures of serial interfaces.
- Overview of Serial Interfaces
Serial interfaces are widely used wide area network (WAN) interfaces and can work in synchronous or asynchronous mode. Therefore, serial interfaces are also called synchronous/asynchronous serial interfaces. - Licensing Requirements and Limitations for Serial Interfaces
- Application Scenarios for Serial Interfaces
- Default Settings for Serial Interfaces
This section describes the default settings for serial interfaces. - Configuring a Synchronous Serial Interface
Configuring a synchronous serial interface includes setting physical and link layer parameters for the synchronous serial interface. - Configuring an Asynchronous Serial Interface
Configuring an asynchronous serial interface includes setting the working mode and parameters for the asynchronous serial interface. - Configuration Examples for Serial Interfaces
This section provides several serial interface configuration examples, including network requirements, configuration roadmap, configuration procedure, and configuration files. - FAQ About Serial Interfaces