Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Bandwidth of an Interface
Context
The bandwidth command mainly ensures that the network management station (NMS) can acquire the bandwidth of an interface. The NMS can check the interface bandwidth through the two objects ifSpeed and ifHighSpeed in IF-MIB.
- If the configured bandwidth is smaller than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as bandwidth x 1000 x 1000 and bandwidth.
- If the configured bandwidth is equal to or larger than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as 4294967295 (0XFFFFFFFF) and bandwidth.