Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for E1-F Interfaces
Involved Network Elements
None
Licensing Requirements
An E1-F interface is a basic feature of an AR router and is not under license control.
Hardware Requirements
This section is applicable to all models. For details about differences for specific models, see the description in the corresponding section.
Feature Limitations
The 1E1/T1-F, 2E1/T1-F, 4E1/T1-F, and 8E1/T1-F interface cards support E1-F interfaces. For the mapping between the device and interface card, see 1E1/T1-F (1-Port Fractional Channelized E1/T1 WAN Interface Card), 2E1/T1-F (2-Port Fractional Channelized E1/T1 WAN Interface Card), 4E1/T1-F (4-Port Fractional Channelized E1 WAN Interface Card) or 8E1/T1-F (8-Port Fractional Channelized E1 WAN Interface Card) in the NetEngine AR Get to Know the Product-Hardware Description-Cards-E1/T1 Card.