Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the G.SHDSL Interface Configuration
Procedure
- Run the display dsl interface { atm | ethernet } interface-number command to check information about the G.SHDSL interface.
You can view the G.SHDSL interface according to the interface transmission mode (ATM or PTM).
The fields displayed in the command output are the same for G.SHDSL interfaces working in ATM or PTM transmission mode.
