Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of Multicast Network Management Configuration Tasks
Table 11-1 lists multicast network management configuration tasks.
Table 11-1 Multicast network management configuration tasks
Task |
Description |
|---|---|
| Configuring Basic Multicast Network Management Functions | After multicast network management is enabled, you can bind multicast management information bases (MIBs) to the public network instance and enable trap of a specified module. In this way, status of events on a specified protocol is monitored.
Currently, the following MIBs are supported:
|
| Adjusting the Frequency for Multicast Protocols to Send Trap Messages | Set the interval at which multicast protocols send trap messages so that you can monitor status of events on multicast protocols in a timely manner. |