Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of IGMP Performance Parameters
Context
You can run the following commands in any view to check the adjusted membership information, IGMP configuration, and IGMP running information.
Procedure
- Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] group [ group-address | interface interface-type interface-number ]* [ verbose ] command to check information about IGMP groups that hosts have dynamically joined by sending IGMP Report messages.
- Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check the IGMP configuration and running information on an interface.
- Run the display igmp [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] ] * [ static ] [ outgoing-interface-number [ number ] ] command to check the IGMP routing table.