Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Static Member Port
Context
A member port is connected to user hosts. The member ports can be learned by multicast protocol dynamically or configured manually. After Multicast Listener Discovery (MLD) snooping is enabled in a VLAN, all interfaces in the VLAN learn the multicast packets by default. When an interface receives an MLD Report message, the device sets the interface as a dynamic member port. A dynamic member port has the aging time.
If the user hosts connected to an interface need to receive the multicast packets destined for a specific multicast group or multicast source group, add the interface to the multicast group or multicast source group manually. The manually added interface is a static member port. The static member port never ages.