Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic MLD Snooping Functions
Context
After basic MLD snooping is configured, the device can generate and maintain the IPv6 Layer 2 multicast forwarding table to distribute multicast data to the receivers at the data link layer as service requires.
Pre-configuration Tasks
Before configuring basic MLD snooping functions, complete the following tasks:
- Connect interfaces and setting physical parameters on the interfaces so that the physical status of the interfaces becomes Up.
- Create VLANs.
- Add interfaces to VLANs.
Configuration Procedure
Only Enabling MLD Snooping and Configuring MLD Snooping Version are mandatory. The other tasks can be selected according to your requirements.
- Enabling MLD Snooping
- Configuring MLD Snooping Version
- (Optional) Configuring a Static Router Port
- (Optional) Configuring a Static Member Port
- (Optional) Configuring the MLD Snooping Querier
- (Optional) Configuring the MLD Message Suppression Time
- (Optional) Configuring the Router-Alert Option
- Verifying the Basic MLD Snooping Function Configuration