Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MSDP Anycast RP Configuration
Context
After configuring anycast rendezvous point (RP) in a Protocol Independent Multicast Sparse Mode (PIM-SM) domain, run the following commands in any view to check the brief and detailed information about MSDP peers and RP information about PIM routing entries.
Procedure
- Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] brief command to check brief information about MSDP peers.
- Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command to check the detailed information about MSDP peers.
- Run the display pim [ vpn-instance vpn-instance-name | all-instance ] routing-table command to check RP information about PIM routing entries.