Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting IPv4 PIM
- SPT on a PIM-DM Network Fails to Be Established
- RPT on a PIM-SM Network Fails to Be Established
- SPT on a PIM-SM Network Fails to Be Established
- Source DR Does Not Send Register Messages to the RP After Receiving Multicast Data Packets
- After the Source DR Sends a Register Message to the RP, the Registration Interface Still Exists in the Corresponding Multicast Forwarding Entry