Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Sending Trap Messages About IGMP Joining Failures Due to Excessive IGMP Entries
Context
By setting the interval for sending trap messages about Internet Group Management Protocol (IGMP) join failures due to excessive IGMP entries, you can monitor the current statuses of multicast protocol events. Perform the following steps on the router managed by the network management system.
Procedure
- Run system-view
The system view is displayed.
- Run multicast-mib
The multicast MIB view is displayed.
- Run igmp trap-interval limit min-interval
The interval for sending trap messages of the failure of IGMP joining because the number of the IGMP entries exceeds the limit is set.
The default value is 0.