Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MLD Snooping
Context
Enabling global MLD snooping is the prerequisite for other MLD snooping configurations. Enabling MLD snooping in a VLAN is the prerequisite for other MLD snooping configurations to take effect in the VLAN. If MLD snooping is disabled in a VLAN, other MLD snooping configurations will be successful but do not take effect until MLD snooping is enabled in the VLAN.
By default, MLD snooping is disabled globally.
Procedure
- Run system-view
The system view is displayed.
- Run mld-snooping enable
MLD snooping is enabled globally.
- Run vlan vlan-id
The VLAN view is displayed.
- Run mld-snooping enable
MLD snooping is enabled in a VLAN.
You can run the mld-snooping enable [ vlan { vlan-id1 [ to vlan-id2 ] } &<1-10> ] command in the system view to enable MLD snooping in multiple VLANs.