Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IPv4 Multicast Route Management
Table 7-8 lists the default settings for IPv4 multicast route management.
Table 7-8 Default settings for IPv4 multicast route management
| Parameter | Default Setting |
|---|---|
Longest match rule for multicast route selection |
Not configured. The reverse path forwarding (RPF) route is selected based on router preference during an RPF check. |
Multicast load splitting |
Disabled. Only one route is selected to forward multicast packets. |
Multicast boundary |
Not configured. |