Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IGMP Functions
Context
Hosts can connect to multicast networks and receive multicast packets after basic IGMP configuration is complete on interfaces connected to user networks.
Pre-configuration Tasks
Before configuring IGMP basic functions, configure a unicast routing protocol to ensure that multicast devices have reachable unicast routes to each other.
Configuration Procedure
Enabling IGMP and Configuring the IGMP Version are mandatory. The other configuration tasks are optional.
- Enabling IGMP
- Configuring the IGMP Version
- (Optional) Configuring a Static Multicast Group on an Interface
- (Optional) Configuring the Range of Multicast Groups That an Interface Can Join
- (Optional) Configuring an Interface to Send IGMP Report Messages with the Multicast Address Used by a Routing Protocol
- Verifying the Basic IGMP Function Configuration