Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MLD
Context
IPv6 multicast routing is the prerequisite for configuring all IPv6 multicast functions. You must enable IPv6 multicast routing before configuring an IPv6 multicast protocol.
Before configuring Multicast Listener Discovery (MLD) on a multicast router, enable MLD on an interface connected to receiver hosts.
Procedure
- Run system-view
The system view is displayed.
- Run multicast ipv6 routing-enable
IPv6 multicast routing is enabled.
- Run interface interface-type interface-number
The interface view is displayed.
- Run mld enable
MLD is enabled on the interface.
By default, MLD is disabled on an interface.
If IPv6 PIM and MLD need to be enabled on the same interface, enable IPv6 PIM and MLD in sequence.
