Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Frequency for Multicast Protocols to Send Trap Messages
Context
By adjusting the frequency for each multicast protocol to send trap messages, you can monitor the current statuses of various multicast protocol events.
Pre-configuration Tasks
Before adjusting the frequency for multicast protocols to send trap messages, complete the following tasks:
- Configure basic Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) functions.
- Configure basic Protocol Independent Multicast (PIM) functions.
- Enable the multicast trap function.
- Adjusting the Frequency for IGMP or MLD to Send Trap Messages
- Adjusting the Interval for PIM to Send Trap Messages
- Setting the Interval for Sending Trap Messages About IGMP Joining Failures Due to Excessive IGMP Entries
- Verifying the Configuration of the Frequency for Multicast Protocols to Send Trap Messages