Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring TCP/UDP Packet Protection
Context
When a large number of protocol packets enter a device, the device will discard some protocol packets to protect CPU resources. In this case, you can configure the device to protect TCP and UDP packets based on DSCP values. After the protection function is configured, the device sends TCP and UDP packets with the specified DSCP value to a certain queue so that packets in the queue are preferentially sent to the CPU for processing.
- This function is supported in V300R019C10 and later versions
- Only the AR651, AR651K, AR651C, AR651F-Lite, AR651U-A4, AR651W-8P, AR651W, and AR657W support this function.
- Only the AR6120, AR6120-VW, AR6121E, AR6121, AR6121K, AR6140K-9G-2AC, AR6140E-9G-2AC, and AR6140-9G-2AC support this function.
- Only the AR6120-S, AR6121C-S, and AR6140-S support this function.