Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Optimizing IP Performance
This section describes how to optimize IP performance. You can set IP performance parameters to achieve best network performance.
- Configuring Source IP Addresses Verification
- Configuring IP Packet Verification
- Configuring an Outbound Interface to Fragment IP Packets
- Configuring Virtual Fragment Reassembly of IP Packets
- Configuring Unequal Cost Multiple Path
- Configuring the Device to Process IP Packets with Options
- Configuring the Enhanced Forwarding Function for Control Packets Generated by the Device
- Disabling the Routing and Forwarding Function on 8FE1GE and 24GE Cards
- Configuring an Order Preserving Mode
- Configuring ICMP properties
- Configuring TCP Properties
- Configuring a Traffic Load Balancing Mode
- Configuring TCP/UDP Packet Protection
- Verifying the IP Performance Configuration