Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Public Address Cannot Be Pinged When NAT Is Configured on the Device as the Egress Gateway. How Do I Solve the Problem?
After outbound NAT is configured, run the ip soft-forward enhance enable command to enable the enhanced IP forwarding function before running the ping -a source-ip-address host command. The device then translates private source addresses into public addresses when sending packets.