Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A DHCP Client Can Obtain an IP Address Through the DHCP Relay Agent, but Cannot Access the Internet
Table 3-9 Troubleshooting roadmap and solution
| Possible Cause | Troubleshooting Roadmap | Solution |
|---|---|---|
| The DHCP client does not obtain the egress gateway address. | The DHCP client can obtain an IP address through the DHCP relay agent, but cannot access the Internet or ping the DHCP server. The phenomenon indicates that the DHCP relay agent and DHCP server work properly. The possible cause is that the DHCP client does not obtain the egress gateway address. Run the display ip pool command to check whether the egress gateway address for DHCP clients is configured in the address pool. If the Gateway-0 field in the command output displays -, the egress gateway address for DHCP clients is not configured in the address pool. | Run the gateway-list ip-address &<1-8> command in the global address pool view of the DHCP server to configure the egress gateway address for DHCP clients. |