Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQ About NAT
- Does NAT Support VPN Multi-Instance?
- Can the Global Address of the NAT Server Be an Address in the NAT Address Pool?
- Users on an Internal Network Cannot Access Internal Servers Using Domain Names. Why?
- Private Network User and Server Are in the Same VLAN. After NAT Server Is Configured on the VLANIF Interface, Why Cannot the User Access the Server Using Public Address?
- Which Interfaces Support NAT?
- Public Address Cannot Be Pinged When NAT Is Configured on the Device as the Egress Gateway. How Do I Solve the Problem?
- How Do I Prevent Packets Sent to an IP Address in a Configured NAT Address Pool from Being Discarded?
- What Should I Do If the CPU Usage Is High After DNS Mapping Is Configured?
- An External Phone Fails to Register With the SIP Server After a NAT Server Is Configured on the Outbound Interfaces of the Device Functioning as a SIP Server.
- Network Access Through Internet-side Port 80, 8080, or 443 Fails.
- What Are the Differences Between NAT Server and NAT Static Modes?
- What Are Differences of Easy IP and Address Pool?