Disabling the Routing and Forwarding Function on 8FE1GE and 24GE Cards
Context
By default, the routing and forwarding function is enabled on 8FE1GE and 24GE cards to implement IP packet routing and forwarding. Configuring ACLs on 8FE1GE and 24GE cards is complex, and ACL-based traffic policy and URPF cannot be configured on 8FE1GE and 24GE cards. This restricts the use of ACLs. When the routing and forwarding function is disabled on 8FE1GE and 24GE cards, you can redirect the packets received on 8FE1GE and 24GE cards to the sub-core CPU for packet forwarding. In this situation, you can configure ACL-based traffic policies and URPF and simplify the ACL configuration.
Procedure
- Run system-view
The system view is displayed.
- Run set workmode lan-card l3centralize
The routing and forwarding function is disabled on 8FE1GE and 24GE cards.
By default, the routing and forwarding function is enabled on 8FE1GE and 24GE cards.Only the models equipped with the SRU-100H, SRU-100HH, SRU-200H, SRU-400HK, SRU-600HK, SRU-400H, and SRU-600H support this function.
Only the AR6140-16G4XG supports this function.
Only the AR6140H-S supports this function.
