Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IP Performance Configuration
Procedure
- Run the display tcp status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ip-address ] [ local-port local-port-number ] [ remote-ip ip-address ] [ remote-port remote-port-number ] ] to check the TCP connection status.
- Run the display tcp statistics command to view TCP traffic statistics.
- Run the display udp statistics command to view UDP traffic statistics.
- Run the display ip statistics command to view IP traffic statistics.
- Run the display ip [ ha ] socket [ monitor ] [ task-id task-id socket-id socket-id | socket-type socket-type ] command to check information about created IPv4 sockets.
- Run the display icmp statistics command to view ICMP traffic statistics.
- Run the display load-sharing ip-address ip-address mask vrf vrf-id command to check the UCMP configuration.
- Run the display workmode soft-order command to check the current order preserving mode.
This function is supported in V300R019C10 and later versions.
Only AR6140H-S, AR6140-16G4XG, and the devices equipped with the SRU-100HH, SRU-400HK, SRU-600HK, SRU-400H, and SRU-600H support this function.
