Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Prevent the Auto-Config Function from Periodically Clearing DHCP-related Configurations on the Device?
When a device with empty configuration starts, the auto-config function allows the device to automatically obtain the configuration file and restart for the configuration to take effect. The device enabled with the auto-config function periodically clears all DHCP-related configurations on the device.
To solve this problem, proceed as follows:
- Run the undo autoconfig enable command to disable the auto-config function.
- Wait 4 to 5 minutes and run the display autoconfig-status command to check the auto-config status. If the Running status is NO, the auto-config function has been disabled.
- Reconfigure the device as required by the customer and save the configuration.
The DHCP function is optimized in V200R008C00 and later versions, so this problem will not occur.