Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Traffic Policing on an Interface
Pre-configuration Tasks
After CAR is configured on an interface in the outbound direction, the device limits the rate of outgoing packets on the interface. Traffic policing does not increase the delay.
Before configuring interface-based traffic policing,
complete the following task:
- Configure traffic policy nesting.
Procedure
- Set traffic policing parameters based on site requirements. For details, see Configuring Interface-based Traffic Policing.