Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Traffic Statistics
Context
Before checking flow-based traffic statistics, ensure that a traffic policy has been created and has defined the traffic statistics action.
Procedure
- Run the display traffic policy statistics interface interface-type interface-number [ pvc vpi-number/vci-number | dlci dlci-number ] { inbound | outbound } [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] [ preprocess | firstprocess | hardware | decap-process ] or display traffic policy statistics interface virtual-template vt-number virtual-access va-number { inbound | outbound } [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] command to check flow-based traffic statistics.
Only the SRU-100HH, SRU-400HK, SRU-600HK, SRU-400H, and SRU-600H support the hardware parameter.
The decap-process parameter is supported only in V300R019C13 and later versions.
- Run the display qos queue statistics interface interface-type interface-number [ queue queue-index ] or display qos queue statistics interface virtual-template vt-number virtual-access va-number [ queue queue-index ] command to check traffic statistics in a queue on an interface.
