Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Priority Mapping Table
Context
The device performs priority mapping based on packet priorities or interface priorities. Priority mappings can be configured in the priority mapping table. The device supports mapping between 802.1p, MPLS-EXP, and DSCP priorities, and can map 802.1p, MPLS-EXP or DSCP priorities to local priorities.
Procedure
- Run system-view
The system view is displayed.
- Run qos map-table { dot1p-dot1p | dot1p-dscp | dot1p-lp | dscp-dot1p | dscp-dscp | dscp-lp | exp-exp | exp-lp }
The priority mapping table view is displayed.
- Run input { input-value1 [ to input-value2 ] } &<1-10> output output-value
A priority mapping is configured in the priority mapping table.