Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why IP-based CAR Is Invalid on a WAN-side Interface?
Because NAT is configured on the WAN-side interface, the device cannot differentiate private IP addresses.
In V200R002C00 and later versions, to configure IP-based CAR on a WAN-side interface, create a VLANIF interface on the device and then configure IP-based CAR on the VLANIF interface.
- To limit the download rate, configure IP-based CAR for a specified destination address in the outbound direction.
- To limit the upload rate, configure IP-based CAR for a specified source address in the inbound direction.