Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQ About Traffic Policing and Traffic Shaping
- Does the Device Support Rate Limiting Based on IP Addresses?
- How Is Bandwidth of Different Types of Traffic Guaranteed?
- Why IP-based CAR Is Invalid on a WAN-side Interface?
- Can IP-based Rate Limit Be Configured on a Layer 2 Interface?
- What Are Differences Between the Outbound Traffic Policing and Traffic Shaping?
- Can the qos gts and qos car Commands Be Used Simultaneously for Outgoing Packets?
- The Interval at Which the Traffic Shaping Rate Increases Can Be Set, But the Interval at Which the Traffic Shaping Rate Decreases Cannot Be Set. Why?
- Can the Adaptive Traffic Profile Be Bound to an NQA Test Instance?
- Is the Upper or Lower Threshold for the Traffic Shaping Rate in the Adaptive Traffic Profile Used by Default?