Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Traffic Policing Configuration
Procedure
- Run the display traffic behavior { system-defined | user-defined } [ behavior-name ] command to check the traffic behavior configuration.
- Run the display traffic classifier { system-defined | user-defined } [ classifier-name ] command to check the traffic classifier configuration.
- Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the traffic policy configuration.
- Run the display traffic-policy applied-record [ policy-name ] command to check the record of a traffic policy that has been applied.
- Run the display qos car statistics interface interface-type interface-number { inbound [ decap-process ] | outbound } or display qos car statistics interface { virtual-template vt-number virtual-access va-number } { inbound | outbound } command to check statistics about packets forwarded and discarded on an interface.
The decap-process parameter is supported only in V300R019C13 and later versions.
