Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying MQC Statistics
Context
MQC statistics are also traffic policy statistics. To check forwarded and discarded packets after a traffic policy is applied, you can view traffic policy statistics.
Before viewing traffic policy statistics, ensure that MQC and the statistic enable (traffic behavior view) command have been configured.
Procedure
- Run the display traffic policy statistics interface interface-type interface-number [ pvc vpi-number/vci-number | dlci dlci-number ] { inbound | outbound } [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] [ preprocess | firstprocess | hardware | decap-process ] or display traffic policy statistics interface virtual-template vt-number virtual-access va-number { inbound | outbound } [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] command to check packet statistics on a specified interface to which a traffic policy has been applied.
Only the SRU-100HH, SRU-400HK, SRU-600HK, SRU-400H, and SRU-600H support the hardware parameter.
The decap-process parameter is supported only in V300R019C13 and later versions.
- Run the display traffic policy statistics bridge-domain bd-id { inbound | outbound } [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] command to check packet statistics on a specified BD to which a traffic policy has been applied.
- Run the display traffic policy statistics global [ verbose { classifier-base | rule-base } [ class classifier-name [ son-class son-class-name ] ] ] command to check statistics on packets matching a global traffic policy.
