Configuring the Device to Work in SIP AG Mode
Context
You can configure the device to work in SIP AG mode, H.248 AG mode, or PBX mode. Before configuring SIP AG service features, configure the device to work in SIP AG mode. Before the configuration, run the display voice service-mode command to query the working mode of the device. If the working mode is not SIP AG, you need to run the display current-configuration command to query the configurations and then delete all configurations in the voice view. Then, set the working mode of the device to SIP AG. If the device works in SIP AG mode, skip this configuration.
Pre-configuration Tasks
Configuring IP addresses for interfaces and routing protocols to ensure connectivity
Procedure
- Run:
system-view
The system view is displayed.
- Run:
voice
The voice view is displayed.
- Run:
service-mode SIP AG
The device is configured to work in SIP AG mode.
- Run:
quit
Return to the system view.
- Run:
quit
Return to the user view.
- Run:
save
The configuration is saved.
- Run:
reboot
The device is restarted.
After the device is configured to work in SIP AG mode, restart the device to make the configuration take effect.