Configuring the Service Password
This section describes how to change the service password. You can configure the service password call prefix through the administrator and dial the call prefix to change the service password, or directly change the service password through the administrator.
Configuring the Service Password
Step |
Operation |
Command |
---|---|---|
1 |
Enter the system view. |
system-view |
2 |
Enter the voice view. |
voice |
3 |
Enter the PBX user view. |
pbxuser name |
4 |
Configure the service password. |
telno service-password cipher |
5 |
Return to the voice view. |
quit |
(Optional) Configuring a Call Prefix
When the PBX needs to provide the service password change service for end users, the call prefix must be configured.
Step |
Operation |
Command |
Description |
---|---|---|---|
1 |
Enter the system view. |
system-view |
- |
2 |
Enter the voice view. |
voice |
- |
3 |
Create a prefix profile view and access the view. |
callprefix callprefix-name |
- |
4 |
Configure a prefix. |
prefix prefix |
- |
5 |
Configure the call type and call attribute for the prefix. |
call-type category callcategory attribute attribute |
Set category (call type) to new-supplementary-management. Set attribute to 121 for the service password call prefix. |
6 |
Configure the minimum length and maximum length of a number for number analysis. |
digit-length minimum-length-value maximum-length-value |
- |
7 |
Save the configuration. |
save |
- |
Configuration Example
Change the service password to 012345 for user 7000 and configure the call prefix *121* as the service password call prefix.
<Huawei> system-view [Huawei] voice [huawei-voice] pbxuser 7000 [Huawei-voice-pbxuser-7000] pbxuser 7000 [Huawei-voice-pbxuser-7000] telno service-password cipher Please input user password(6-6 chars):******* [Huawei-voice-pbxuser-7000] quit [Huawei-voice] callprefix *121* [Huawei-voice-callprefix-*121*] prefix *121* [Huawei-voice-callprefix-*121*] call-type category new-supplementary-management attribute 121 [Huawei-voice-callprefix-*121*] digit-length 5 32 [Huawei-voice-callprefix-*121*] save
Using the Service
User A picks up the phone and dials *121*SSSSSS*NNNNNN#. If the old password is correct and the new password is valid, the announcement "The new service you applied for has been registered" is played, indicating that the password is changed successfully.
- SSSSSS indicates the six-digit old password. NNNNNN indicates the six-digit new password. The default username and password are available in AR Router Default Usernames and Passwords (Enterprise Network or Carrier). If you have not obtained the access permission of the document, see Help on the website to find out how to obtain it.
- Both the old password and new password must contain six digits.