Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a mapping of a built-in tone
This section describes how to set a built-in tone mapping.
Prerequisites
The working mode of the device has been set to PBX. For details on how to configure the working mode of device, see Configuring a Device to Work in PBX Mode.
V300R019C13 and later versions support the command.
Procedure
Step |
Action |
Command |
Description |
|---|---|---|---|
1 |
Enter the system view. |
system-view |
- |
2 |
Enter the voice view. |
voice |
- |
3 |
Mapping a built-in tone of a system to a built-in tone of another system or an external tone file. |
tone-set id toneid-value1 { toneid toneid-value2 | file-name file-name } |
- |
Verification
Action |
Command |
Expected Result |
|---|---|---|
Querying the Mapping Between Reason Codes and Announcements. |
display voice tone-set |
The parameter values in the command output are consistent with the settings. |