Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process for PBX
This section describes the process for configuring voice service data on the PBX. In the configuration process, optional tasks and subtasks are performed according to your site requirements.
Figure 2-4 illustrates the PBX configuration process.
Plan and configure the service data by strictly
following the information described in Configuring Toll Fraud Prevention. Otherwise, toll fraud (placing international toll calls
or premium-rate telephone numbers bypassing the security policies)
may occur, causing economic losses.
