Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for the SIP AG
This section describes the notes about configuring the SIP AG.
Involved Network Elements
None
Licensing Requirements
For devices that support voice functions (such as PBX, SIP AG, and H.248 AG), their licensing requirements for the voice functions are as follows:
By default, voice functions cannot be used. To use voice functions, apply for and purchase the following license from the Huawei local office.
This function is not under license control on AR617VW, AR617VW-LTE4, and AR617VW-LTE4EA.
- AR6100 series: AR6100 Value-Added Voice Package
- AR6200 series: AR6200 Value-Added Voice Package
- AR6300 series: AR6300 Value-Added Voice Package
If phones of any type are deployed on an AR router, a CM&BEST license must be purchased based on the number of deployed phones.
- CM&BEST license-5 phones
- CM&BEST license-25 phones
- CM&BEST license-100 phones
Hardware Requirements
Table 3-1 Hardware requirements
Series |
Feature Support |
|---|---|
AR300, AR600, AR700, AR1600, and AR6000 series |
|
AR6000-S series |
Not supported |
Interface card/SRU |
Only the SRU-200H support voice functions (such as PBX, SIP AG, and H.248 AG). |
- The 4FXS1FXO, 16FXS, 32FXS, and 4FXS voice cards support POTS users. For the mapping between the device and voice card, see 4FXS1FXO (4-Port FXS + 1-Port FXO Voice Interface Card), 16FXS (16-Port FXS Voice Interface Card), 32FXS (32-Port FXS Voice Interface Card), 4FXS (4-Port FXS Voice Interface Card) in the NetEngine AR Get to Know the Product-Hardware Description-Cards-Voice Card.
- The 2BST voice card supports providing voice services to ISDN phone users. For the mapping between the device and voice card, see 2BST (2-Port ISDN S/T Voice Interface Card) in the NetEngine AR Get to Know the Product-Hardware Description-Cards-Voice Card.
- The E1T1-M interface card supports connecting a router to a TDM PBX through E1 interface. For the mapping between the device and voice card, see 1E1/T1-M (1-Port Channelized E1/T1/PRI/VE1 Multiflex Trunk Interface Card) in the NetEngine AR Get to Know the Product-Hardware Description-Cards-E1/T1 Card.
- The 4FXS voice card only supports PBX.
- The 4FXS voice card does not support three-party services.
- The 4FXS voice card of the AR6300, AR6300-S, and AR6300K does not support Master/Slave Switchover.
Feature Limitations
None.