Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SIP AG Configuration
This document describes the implementation and configurations of the Session Initiation Protocol access gateway (SIP AG).
- Overview of the SIP AG
This section describes the Session Initiation Protocol access gateway (SIP AG) in Voice over IP (VoIP) applications. - Understanding the SIP AG
- SIP AG Features Supported by the Device
This section describes SIP AG features supported by the device. - Application Scenarios for the SIP AG
- Licensing Requirements and Limitations for the SIP AG
This section describes the notes about configuring the SIP AG. - Setting Voice Parameters on a SIP AG
This section describes how to set voice parameters on a SIP AG. - Configuring a SIP AG Interface
You can configure a SIG AG interface to connect SIP users to the IMS for voice, data, and multimedia services. - Configuring a SIP AG User
This section describes how to configure a SIP AG user. - Maintaining a SIP AG
This section describes how to maintain a SIP AG. - Advanced Configurations
This topic describes how to set physical voice interface parameters and SIP AG global voice parameters.