Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a SIP AG User Group
Procedure
- Run:
system-viewThe system view is displayed.
- Run:
voiceThe voice view is displayed.
- Run:
SIP AGusergroup SIP AG-interface-id usergroup-id
A SIP AG user group is created.
- Set parameters for the SIP AG user group.
Run:
group-name usergroup-name
The description is configured.
Run:
auth username auth-username password { cipher cipher-password | ha1 cipher cipher-password }The authentication user name and password are configured.
Run:
precinct-mode { local | remote }
The mode used to manage users in the SIP AP user group is configured.
Run:
register-uri-mode { inneruser | alone }
The registrar URI mode is configured.
Run:
subscribe ua-profile { enable | disable }
The mode used to initiate a UA profile subscription request is configured.
Run:
uri uri
A URI is configured.
Run:
endserviceServices of a specified user group are terminated.
