Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a PBX User
You can configure different types of PBX users according to actual networking and user planning. Terminal users on the PBX contain POTS, SIP, and ISDN users.
- Configuring a POTS User
After a number and call right are configured for a POTS user, the POTS user device such as a POTS phone can make incoming and outgoing calls. - Configuring a SIP User
After a number and call right are configured for a Session Initiation Protocol (SIP) user, the SIP user device such as an IP phone can make incoming and outgoing calls. - Configuring an ISDN User
After a number and call rights are configured for an ISDN user, its ISDN phone can make incoming and outgoing calls.