Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Are Packets Lost When the STA Pings the Gateway?
Run the dtim-interval 1 and beacon-interval 100 commands to configure the DTIM interval and Beacon interval specified in the radio profile.
DTIM refers to delivery traffic indication map.
An AP broadcasts Beacon frames at intervals to notify STAs of an existing 802.11 network.