Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for WLAN-Fat AP Security
This section describes the default settings for WLAN security.
Table 4-1 Default settings for WLAN security
Parameter |
Default Setting |
|---|---|
Security policy |
WEP |
WEP security policy |
Open system authentication+non-encryption |
WPA security policy |
802.1x+PEAP authentication+TKIP encryption |
WPA2 security policy |
802.1x+PEAP authentication+CCMP encryption |
WAPI security policy |
WAPI-CERT authentication+WPI encryption |
WAPI USK/MSK update mode |
Time-based update |
WAPI USK/MSK update parameters |
|
STA blacklist and whitelist |
Disabled |